Scansonic DA300 User Manual download pdf (Page 6)

UK-5

4. Press the

button to turn the radio on again, it will then automatically enter into the DAB mode and perform

auto scan function. After the scan has finished, the radio will select and display the first alphanumerically found

station.

ALARM FUNCTION

This unit incorporates an identical Dual Alarm function. You can have two individual alarm wake-up time and

wake-up mode settings to wake you to an electronic buzzer tone or your favourite radio station (DAB/FM).

Setting the alarm time and wake-up mode

1. Press the ALARM button once to enter into the Alarm Menu, then rotate the SCROLL control followed by

pressing on the same control to select Alarm (1 or 2).

2. Again rotate the SCROLL control followed by pressing on the same control to select "Alarm Setting'. The

display will show "Alarm # Setting" and the hour digit of the alarm time will flash. (F10)

3. Rotate the SCROLL control followed by pressing on the same control to adjust and confirm your desired alarm

time - first set the hour and then the minute.

4. After the confirmation of the minute setting, the alarm time is set and you will enter into the wake-up mode

settings.

5. Rotate the SCROLL control followed by pressing on the same control to adjust and confirm the wake-up mode

settings - first set the DAB and FM Preset (1-10), then the Buzzer Tone (1 or 2), finally the alarm Volume level.

(F11)

6. After the selection of the alarm volume level, the wake-up mode settings are completed and the alarm function

is now ready for you to activate.

7. Repeat the above procedures to set the other Alarm (1 or 2).

Activating the alarm function

1. To activate the alarm function, press the ALARM button to enter into the Alarm Menu and select Alarm (1 or 2).

2. Rotate the SCROLL control followed by pressing on the same control to select "Alarm Source".

3. Again rotate the SCROLL control and the associated alarm wake-up mode will be displayed and changed in

the below sequence:

4. When the display shows your desired alarm wake-up mode, press the SCROLL control, the alarm function is

now activated and the associated alarm icon will be displayed.

5. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the display will flash

to indicate the alarm is triggered. To stop the alarm sooner, press the

button.

Note 1: If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the alarm

volume level is set at a sufficient level for you to hear.

Note 2: The alarm comes first will have the priority and it would continue for a duration of one hour, the snooze

will just switch off this alarm temporary during this duration, so if the second alarm comes In this period, it will not

function. But if the first alarm is switched off before the second alarm arrives, then the second alarm will be

activated.

Automatic Alarm Repeat

The alarm will automatically repeat each day at the selected time as long as the alarm icon is displayed. To cancel

this function, go to the Alarm Menu and select "Alarm # off" in the associated "Alarm Source" menu.

Snooze function

When the alarm has triggered, press the SNOOZE button will temporary switch off the alarm for 5 minutes, the

display will show "Zz" to indicate snooze on. This is repeatable in the one hour alarm duration.

1 2 3 4 5 6 7 8 9 10 11 ... 44 45

Comments to this Manuals

No comments

Scansonic DA300 User Manual Page 6

Comments to this Manuals

Related products and manuals for Radios Scansonic DA300